Info & Guides
6" (150mm) Dinak DW Twin Wall Chimney System
Dinak DW was started back in 1983 and since then has been striving for high quality and technological innovation within the field of heating solutions. Our 6" high quality Dinak Twin Wall range of insulated flue pipes have an accurate 150mm internal diameter, 30mm of compressed insulation and an external diameter of 200mm.
Note, Locking Bands must be purchased separately and provide for safe and secure connections without the need for extra sealants or cements.
Please note, all items listed below which fit around the 6" Dinak Twin Wall such as Wall Brackets, Finishing Plates and Storm Collars will measure 200mm to accommodate the greater external diameter of the pipes.
The 6 inch Twin wall chimney flue is externally 8 inches; the external diameter to connect this to the single wall pipe requires an adapter that goes from single wall to a 6 inch twin wall pipe. Every 6 inch twin wall flue part comes with a free up to 45 degree joint seal, also for the use with pellet stoves. Dinak DW flues are a push fit system that requires a locking band for each component of which these are sold separately.
The Dinak DW twin wall has recently been given the EI 120 and EI 90 certifications for smoke control conduits, making Dinak DW flues the only flue manufacturer to obtain both these 2 certifications. Being awarded the EI 120 certification means you can have both for vertical and horizontal set-ups meaning the Dinak DW twin wall has become the first European metal chimney and conduit to hold this certification.
Why Use Twin Wall Chimney Flues?
The twin wall chimney flues are used when no existing chimney is present. You can create a chimney system for you wood burning stove, gas fire or boiler with this system. Dinak DW Twin wall chimney flues are of the best quality twin wall chimney flues on the market.
More Information on Installing Twin Wall Chimney Flues
If you require more information on twin wall chimney flues. Click here installing chimney flue pipes.