Directions For Use:
If possible remove the door from the stove and place on a flat surface, remembering to protect the glass from scratching. Remove the old rope and ensure all remnants of adhesive have been removed by using wire wool or a steel brush. Place the new rope into the groove in the door without stretching or bunching, allow 2-3mm for adjustment and then cut to size. Ensure the ends are cut at a 90 degree angle.
Apply the adhesive, which is of a watery consistency, into the channel and then place the stove rope on top. Secure the rope into place with tape or pegs (for example) for a full 24 hours to allow the adhesive to cure sufficiently. The application of some heat can quicken the process.
Jim –
Does what it says, easy to apply and quick drying.