We are doing all we can to protect our customers and staff from the current Coronavirus outbreak. New procedures have been implemented to allow us to continue offering our normal service and next day deliveries on most items. We have also closed our showroom and we are not currently offering the click and collect service. We will continue to offer our customers the best service we can throughout this crisis and will update you as the situation changes.

121-254mm - Low Temp EPDM No:6 Corrugated / Flat Roof

121-254mm - Low Temp EPDM No:6 Corrugated / Flat Roof

£24.94 inc VAT


Get this item Tuesday if you order within and choose next day shipping at checkout

Order By 7.30am For Next Working Day Delivery* *select delivery upgrade at checkout

Available for collection within 2 working hours

No need to create an account to get delivery costs.
For a full delivery quote to your address, add the products you require to your basket and click the ‘View Contents’ button to see a full list of delivery options and costs for your entire order.

Technical Data

    Flashing provides a weather tight seal for Twin Wall insulated flue to pass through a roof surface.

    The flexible silicone cone allows for movement in the pipe and the base is designed to fit the contours of any roof type other than tiled or slate (sold separately). To fit the flashing, you simple trim the silicone section to accommodate your Twin Wall diameter, slide over the flue pipe and secure to the roof surface with Sealant or Fixing Kit for a weather proof seal (both sold separately). Use a Storm Collar a short distance above the Flashing to offer greater protection from the elements.

    Please Note - The base diameter (found in the Technical Data table) for this product must be checked against the size of hole to be cut through the roof surface to ensure it is suitably sized for your installation. Only use maximum pipe diameters on minimal roof angles. For extreme pitch or surface irregularities select next larger size.

    DIMENSIONS (Twin Wall external diameters & base size)

    Flash 601


    This product has a low temperature resistance and therefore should not be installed within 5m of the stove. For this application you shall require a high temperature Flashing (sold separately). Suitable for use with all solid fuels as well as gas and oil appliances.

    For further information regarding Twin Wall installations, please click here.

    Call us for help: 0844 5876034

    • Product: Master Flashing
    • Tiled / Slate Roof: No
    • High / Low Temp.: Low
    • Temp. Resistance (intermittent): 135°C
    • Temp. Resistance (continuous): 100°C
    • Pipe Ext. Diameter: 4.75" - 10"
    • Base Size: 12" x 12"
    • Top Opening Diameter: 3.75"
    • Connection: Silicone / Screws (not included)
    • Code: No.6