Anti-Wind Cowl For Vitreous Flue Pipe - Black - 6" (150mm)
Order By 12.00pm For Next Working Day Delivery* *select delivery upgrade at checkout
Available for collection within one business day
No need to create an account to get delivery costs.
For a full delivery quote to your address, add the products you require to your basket and click the ‘View Contents’ button to see a full list of delivery options and costs for your entire order.
Technical Data
This part allows you to add a cowl onto the vitreous enamelled flue pipe to finish off your system whether it be for an outside stove or pizza oven.
Connection
Vitreous Enamelled flue parts have a male connection to push fit inside the pipe or stove outlet below to ensure deposits within the pipes run down into the stove and do not escape. The male connection is always fitted facing downwards as pictured. It is advisable to seal all single wall joints with a suitable high temperature sealant. It is not advisable to cut this single wall pipe down to size.
Construction
Economy Vitreous Enamelled flue is constructed from 0.8mm thick laser welded steel. These pipes are not insulated.
Approvals
All single wall flue supplied by Glowing Embers is fully CE approved for installation in compliance with UK building regulations.
Regulations
Designed for internal use, it is against regulations to pass single wall flue through any surfaces due to the heat emitted from the pipe. The safe clearance to combustibles is three times the diameter of the flue or one and a half times the diameter to non-combustibles. It is advised to limit a run of single wall flue to 2000mm to prevent the loss of heat through the pipe which can lead to flue gases dropping. Please see our Technical Information section for easy to understand guides for all the Building Regulations involved with stoves and flues.
For further information on using Vitreous Enamelled flue in your system, please see our Chimney Installations page or Non-Chimney Installs section