Vitreous Enamelled Increaser 4" (100mm) To 5" (125mm)

Vitreous Enamelled Increaser 4" (100mm) To 5" (125mm)

£34.94 inc VAT

 Out of Stock  

Order By 12.00pm For Next Working Day Delivery* *select delivery upgrade at checkout

Available for collection within one business day

No need to create an account to get delivery costs.
For a full delivery quote to your address, add the products you require to your basket and click the ‘View Contents’ button to see a full list of delivery options and costs for your entire order.

Technical Data


    The INCREASER 4" TO 5" will increase the internal diameter of a single wall flue system and can be utilised either in a length of pipe or directly in the outlet of a stove. These parts receive a coating of enamel to match the traditional aesthetic of a wood burning or multi-fuel stove and to guarantee the resistance of the finish even at very high temperatures. Please note, this is an increaser only and cannot be reversed to act as a reducer due to the male connection on the bottom.

    Connection

    Vitreous Enamelled flue parts have a male connection to push fit inside the pipe or stove outlet below to ensure deposits within the pipes run down into the stove and do not escape. The male connection is always fitted facing downwards as pictured. It is advisable to seal all single wall joints with a suitable high temperature sealant. It is not advisable to cut this single wall pipe down to size.

    Construction

    Vitreous Enamelled flue is constructed from laser welded steel. These pipes are not insulated.

    Approvals

    All single wall flue supplied by Glowing Embers is fully CE approved for installation in compliance with UK building regulations.

    SW Increaser


    Regulations

    Designed for internal use, it is against regulations to pass single wall flue through any surfaces due to the heat emitted from the pipe. The safe clearance to combustibles is three times the diameter of the flue or one and a half times the diameter to non-combustibles. It is advised to limit a run of single wall flue to 2000mm to prevent the loss of heat through the pipe which can lead to flue gases dropping. Please see our Technical Information section for easy to understand guides for all the Building Regulations involved with stoves and flues.

    For further information on using Vitreous Enamelled flue in your system, please see our Chimney Installations page or Non-Chimney Installs section

    Call us for help: 0844 5876034

    • Effective Height of Part: 75mm
    • Internal Diameter At Bottom: 100mm (4")
    • Internal Diameter At Top: 125mm (5")
    • Connection: Male Connection (Push Fit)
    • Distance to Combustibles: 300mm (12")
    • Distance to Non-Combustibles: 150mm (6")
    • Thickness of Steel: 0.8mm
    • Finish: Matt Black
    • Insulated: No
    • Construction: Laser Welded Steel
    • Coating: Vitreous Enamel Inside/Outside
    • Temperature Rating: T600
    • Designation No.: EN1856-2 T600 N1 W Vm L80100 G

    1. Home
    2. Chimney & Flues
    3. Single Wall Flue
    4. Enamelled Economy Range
    5. 4" (100mm)
    6. Vitreous Enamelled Increaser 4" (100mm) To 5" (125mm)