6" (150mm) Anti-Wind Cowl For Vitreous Flue Pipe - Stainless

6" (150mm) Anti-Wind Cowl For Vitreous Flue Pipe - Stainless

£40.16 inc VAT

Qty:  

Get it Tomorrow if you order within and choose next day shipping at checkout

Order By 12.00pm For Next Working Day Delivery* *select delivery upgrade at checkout

Available for collection within one business day

No need to create an account to get delivery costs.
For a full delivery quote to your address, add the products you require to your basket and click the ‘View Contents’ button to see a full list of delivery options and costs for your entire order.

Technical Data


    This part allows you to add a cowl onto the vitreous enamelled flue pipe to finish off your system whether it be for an outside stove or pizza oven.

    Connection

    Vitreous Enamelled flue parts have a male connection to push fit inside the pipe or stove outlet below to ensure deposits within the pipes run down into the stove and do not escape. The male connection is always fitted facing downwards as pictured. It is advisable to seal all single wall joints with a suitable high temperature sealant. It is not advisable to cut this single wall pipe down to size.

    Construction

    Economy Vitreous Enamelled flue is constructed from 0.8mm thick laser welded steel. These pipes are not insulated.

    Approvals

    All single wall flue supplied by Glowing Embers is fully CE approved for installation in compliance with UK building regulations.

    Regulations

    Designed for internal use, it is against regulations to pass single wall flue through any surfaces due to the heat emitted from the pipe. The safe clearance to combustibles is three times the diameter of the flue or one and a half times the diameter to non-combustibles. It is advised to limit a run of single wall flue to 2000mm to prevent the loss of heat through the pipe which can lead to flue gases dropping. Please see our Technical Information section for easy to understand guides for all the Building Regulations involved with stoves and flues.

    For further information on using Vitreous Enamelled flue in your system, please see our Chimney Installations page or Non-Chimney Installs section

    Call us for help: 0844 5876034

  • Internal Diameter: 150mm (6")
  • Connection: Male Connection (Push Fit)
  • Distance to Combustibles: 60mm
  • Distance to Non-Combustibles: 0mm
  • Thickness of Steel: 0.5mm
  • Finish: Stainless Steel
  • Insulated: No

    1. Home
    2. Chimney & Flues
    3. Single Wall Flue
    4. Enamelled Economy Range
    5. 6" (150mm)
    6. 6" (150mm) Anti-Wind Cowl For Vitreous Flue Pipe - Stainless


    6" (150mm) Anti-Wind Cowl For Vitreous Flue Pipe - Stainless

    6" (150mm) Anti-Wind Cowl For Vitreous Flue Pipe - Stainless

    Sorry we ran out!

    Fill out this form and we will let you know when it comes back in stock